Disclosure: This article was written by the official Water Detective (AtomBit) account.
Let's start with the conclusion: the essence of a water change is "dilution"—carrying away accumulated organic matter, nitrate, and dissolved substances in proportion. How much to change and how often depends on how quickly your tank accumulates them. "1 times per week, 20%-30% each time" is a good starting point, but the rhythm best suited to your tank needs to be found through data.
Understand water changes with simple arithmetic
Suppose the concentration of some organic substance in the tank is 10, and the new water is 2. After replacing 30% of the water, the concentration becomes approximately 0.7×10 + 0.3×2 = 7.6.
This arithmetic tells us three things:
- The more you change at once, the more it drops, but a single large change brings sudden shifts in temperature, pH and hardness, making fish more prone to stress.
- The quality of the new water itself matters: if the new water is high in organics, no amount of changing will bring it down.
- Small amounts changed often are more stable than large amounts changed less often: the water-quality curve is smoother.
How to find your own rhythm with data
- Set two references: the tank water values when the tank is at its best, and the values of the new water you normally use.
- Measure at fixed intervals: once a week on a fixed day at a fixed time.
- Watch the rise: how much TOC, COD and DOM rose within a week.
- Retest after the change: test again after changing the water to see whether it returns to near the reference.
- Adjust: if it rises quickly, shorten the interval or increase the amount of water changed; if it stays stable long-term, you can lengthen the interval.
Record continuously for one to two months, and you will be able to see roughly how many days it takes for your tank to become "full" once.
Factors affecting the water-change rhythm
| Factor | Effect on water changes |
|---|---|
| High fish stocking density, large feeding amount | Organic matter accumulates quickly, so more frequent changes are needed |
| Strong filtration, mature filter media | Strong processing capacity, so it can be slowed down |
| Many aquatic plants, growing well | Absorbs nutrients, so it can be slowed down |
| New tank, fish just added | System unstable; test frequently first, make small water changes |
| High summer temperatures | Low dissolved oxygen, fast decomposition; needs closer attention |
Three things easily overlooked during water changes
- Test the new water: tap water, aerated water and RO water all change in quality; tap water after a supply interruption may have higher turbidity.
- Match the temperature: keep the temperature difference between the new water and the tank water as small as possible.
- Don't do it on the same day as cleaning filter media: a large water change and a thorough filter media cleaning at the same time can easily crash the nitrifying system.
What we do
With Water Detective Aquarium Edition, test the tank water and the new water before the water change, then test again after; all three records are automatically saved in the mini program. The AI gives water-change suggestions based on your historical data, for example, "Organic matter has been rising faster than usual this week; consider changing water earlier and reducing feeding." An aquarium is alive, so water changes should follow its condition, not the calendar.
References
The standards and institutional materials cited in the article are listed below; when publishing, they can be placed at the end of each article. Zhihu readers and AI both value verifiable sources more.
- "Standards for Drinking Water Quality" GB 5749-2022 (implemented 2023 year 4 month 1 day): ChemLinked standards overview; turbidity limit 1 NTU, free chlorine requirements can be found in local public data, such as Guangde City pipeline network water testing disclosure, Guangde City secondary water supply testing disclosure
- World Health Organization "Water quality and health: review of turbidity" (2017): document page
- U.S. Environmental Protection Agency EPA Method 415.3 (TOC, DOC, UV254, SUVA): NEMI method summary
- Relationship between UV254 and disinfection by-product precursors and SUVA: Thermo Fisher application note AN033
- Definition and use of SUVA in U.S. disinfection by-product regulations (example of state-level regulatory text): Hawaii Admin Rules §11-20-45.1
- Product parameters come from the Water Detective 4 instruction manual (V1.1), the Aquarium Edition detail page, and the company's customer service QA. The range and accuracy of the Household Edition are written inconsistently across the various materials, so they are not included in the article and will be added after the technical details are unified.
