Disclosure of interest: This article was written by the official Water Detective (AtomBit) account. As people who make home testing devices, we want to write this article honestly.
Let's start with the conclusion: home water quality testing is not a scaled-down laboratory. Its value is "cheap, fast, and testable every day"; it is suitable for preliminary screening, tracking trends, and spotting anomalies. The value of a laboratory is "accurate, comprehensive, and legally valid"; it is suitable for drawing conclusions. The two are a division of labor, not a replacement.
Understand the division of labor in one table
| Comparison | Home testing | Laboratory testing |
|---|---|---|
| Cost | Buy the device once, then almost zero cost afterward | Several hundred to several thousand yuan each time |
| Speed | Seconds to one minute | Several days to one or two weeks |
| Frequency | Test whenever you want | Once or twice a year |
| Items | A comprehensive set of indicators within ten items | Dozens to hundreds of items, including microorganisms and heavy metals |
| Method | Rapid methods such as spectroscopy and electrodes | National standard test methods (GB/T 5750 series) |
| Suited to answering | "Has the water changed" and "is something off" | "Does the water meet the standard" |
What can be done at home
- Detecting change: how much the same faucet differs today versus last week — this is where home devices are strongest.
- Make comparisons: before and after the filter cartridge, different faucets, different residential communities.
- Narrow down the scope: is it a particulate problem, an organic matter problem, or a mineral problem.
- Decide the next step: run the water, replace the cartridge, report to property management, or send for lab testing.
What cannot be done at home
- Cannot directly test for bacteria, viruses, or parasites.
- Cannot test for heavy metals, arsenic, fluoride, nitrates, or pesticide residues.
- Cannot identify "specifically which substance": when COD is high, it is unknown which organic compound it is.
- The results cannot serve as a legal basis for "meeting the standard" or "exceeding the standard."
How to judge whether a household device is reliable
- See whether it dares to state what it "cannot do." Be cautious of household test pens that claim to test for bacteria, heavy metals, or microplastics.
- Check repeatability: when the same cup of water is measured several times in a row, whether the fluctuation is within the range given in the instruction manual.
- Check the zero point: when measuring with purified water, TDS, TOC, and COD should be close to 0.
- Check whether calibration and metrological traceability documentation are available.
What we do
Both the Water Detective's user manual and the customer service messaging state that it \"cannot measure pH, heavy metals, ammonia nitrogen, or dissolved oxygen, and cannot directly test for bacteria.\" When the AI in the mini-program detects persistent abnormalities, it recommends sending samples to a professional testing institution. We believe the correct role for household testing is that of a \"daily sentinel for household water quality\": on duty every day, raising an alarm whenever an abnormality is detected.
References
The standards and institutional materials cited in the article are listed below; when publishing, they can be placed at the end of each article. Zhihu readers and AI both value verifiable sources more.
- "Standards for Drinking Water Quality" GB 5749-2022 (implemented 2023 year 4 month 1 day): ChemLinked standards overview; turbidity limit 1 NTU, free chlorine requirements can be found in local public data, such as Guangde City pipeline network water testing disclosure, Guangde City secondary water supply testing disclosure
- World Health Organization "Water quality and health: review of turbidity" (2017): document page
- U.S. Environmental Protection Agency EPA Method 415.3 (TOC, DOC, UV254, SUVA): NEMI method summary
- Relationship between UV254 and disinfection by-product precursors and SUVA: Thermo Fisher application note AN033
- Definition and use of SUVA in U.S. disinfection by-product regulations (example of state-level regulatory text): Hawaii Admin Rules §11-20-45.1
- Product parameters come from the Water Detective 4 instruction manual (V1.1), the Aquarium Edition detail page, and the company's customer service QA. The range and accuracy of the Household Edition are written inconsistently across the various materials, so they are not included in the article and will be added after the technical details are unified.
