Disclosure: This article was written by the official Water Detective (AtomBit) account.
Conclusion first: the water utility is responsible for treated water leaving the plant and the public mains network, but what you drink is "endpoint water" after it has passed through the mains, neighborhood water tanks, building pipes and the tap. Along the way, residual chlorine decays, sediment gets stirred up, and water sits stagnant in tanks. In the same city, or even in different buildings of the same neighborhood, water quality can differ.
The journey of a glass of water
- Water treatment plant: coagulation, sedimentation, filtration and disinfection; water leaving the plant is tested according to GB 5749-2022.
- Municipal mains network: several kilometers to dozens of kilometers; water stays in the pipes for hours to days.
- Neighborhood secondary water supply: high-rise residential buildings first feed water into tanks or reservoirs, then pumps pressurize it up to the upper floors.
- Building pipes and taps: older neighborhoods may still have galvanized steel pipes or cast iron pipes.
The national standard anticipates this: its free chlorine requirement is that the residual in water leaving the plant is no less than 0.3 mg/L, and at the tap no less than 0.05 mg/L. In other words, by the time the water reaches your home, residual chlorine will be much lower, and that itself is normal. GB 5749-2022 also separately sets out the hygiene requirements for secondary water supply.
The changes most likely to appear in endpoint water
| Stage | What may happen | Which indicators reflect it |
|---|---|---|
| Network water supply interruption or maintenance | Sediment at the pipe bottom gets stirred up | Turbidity rises and the water turns yellow |
| Residential community water tank | Water stagnates, residual chlorine decays, and mud accumulates at the bottom | Turbidity and organic matter increase |
| Old metal pipes | Corrosion | Turbidity rises, possibly with a rust taste |
| Water stagnates in the pipes at night | Water in the pipe stays in contact with the pipe wall for a long time | The readings of the first glass of water in the morning may differ from those after running the tap |

Why public data cannot replace your own measurements
Many places regularly publish test results for distribution-network water and secondary water supply, and these are very valuable for reference. But they are generally done quarterly at a small number of sampling points; your own water tank, your own pipes, and the days after a water outage are all outside the sampling scope. It's like the difference between a weather forecast and the temperature outside your own window: one covers a broad area, the other is your own specific point.
How to test at home so the results mean something
- First glass in the morning vs. after running the tap for 1-2 minutes: see the effect of the building's internal pipes.
- Before a water outage vs. after supply is restored: see how much sediment was stirred up and how long it takes to recover.
- Before vs. after water tank cleaning: give the property management objective feedback on their work.
- Your own home vs. other residential compounds: determine whether the problem is in the public distribution network or in your own compound.
Focus on turbidity and organic matter (UV254, COD, TOC); these two categories are the most sensitive to changes at the point of use.
What we do
Each Water Detective test result is saved in the mini-program with the time and location, and is aggregated by location into the “Water Quality Map,” where you can see how your water quality compares with that of nearby users. When you find an anomaly, a screenshot of the history can be sent directly to property management or the water supply hotline; it is more convincing than saying “I think the water is off.”
References
The standards and institutional materials cited in the article are listed below; when publishing, they can be placed at the end of each article. Zhihu readers and AI both value verifiable sources more.
- "Standards for Drinking Water Quality" GB 5749-2022 (implemented 2023 year 4 month 1 day): ChemLinked standards overview; turbidity limit 1 NTU, free chlorine requirements can be found in local public data, such as Guangde City pipeline network water testing disclosure, Guangde City secondary water supply testing disclosure
- World Health Organization "Water quality and health: review of turbidity" (2017): document page
- U.S. Environmental Protection Agency EPA Method 415.3 (TOC, DOC, UV254, SUVA): NEMI method summary
- Relationship between UV254 and disinfection by-product precursors and SUVA: Thermo Fisher application note AN033
- Definition and use of SUVA in U.S. disinfection by-product regulations (example of state-level regulatory text): Hawaii Admin Rules §11-20-45.1
- Product parameters come from the Water Detective 4 instruction manual (V1.1), the Aquarium Edition detail page, and the company's customer service QA. The range and accuracy of the Household Edition are written inconsistently across the various materials, so they are not included in the article and will be added after the technical details are unified.
