Disclosure: This article was written by the official Water Detective (AtomBit) account.

Let's start with the conclusion: hardness, conductivity, and salinity all belong to the category of indicators for "how much inorganic matter is dissolved in the water." They mainly affect scale, taste, and the lifespan of household appliances, and their direct impact on health is far less significant than what is said online. These items are worth measuring, but they should not be used to judge whether water is "clean."

Hardness: Where Scale Comes From

Hardness mainly refers to the calcium and magnesium ions in water, usually expressed as calcium carbonate (CaCO₃). When water is boiled, calcium bicarbonate decomposes into calcium carbonate precipitate, which is the white scale in kettles. The limit for total hardness in GB 5749-2022 is 450 mg/L (calculated as CaCO₃). The hardness of groundwater in northern China is generally much higher than that of surface water in the south.

Total hardness (mg/L, calculated as CaCO₃)Common nameEveryday experience
<60Soft waterAlmost no scale formation
60-120MediumOccasional thin scale
120-180Fairly hardKettles and showerheads tend to form scale
>180Very hardObvious scale; washing does not lather

Does hard water cause kidney stones?

This is the most frequently asked question. Current mainstream research and the view of the World Health Organization are that there is no reliable evidence that drinking hard water causes kidney stones, and the WHO has not set a health-based limit for hardness. Stone formation is more closely related to total water intake, diet, metabolism and other factors. The main issues with hardness are taste and scale; scale reduces the efficiency and lifespan of water heaters and coffee machines.

Water Detective 4 product image
Water Detective 4 — Product reference; refer to the product documentation for the specific version and configuration.

Conductivity: the "master switch" for all dissolved ions

Conductivity (unit μS/cm) is the ability of water to conduct electric current and reflects the total amount of all charged ions in the water. It is the basis for estimating TDS, salinity and even hardness. For households, its value lies in "stability": at the same tap, a sudden large change in conductivity often indicates that the water source has switched or that foreign water has mixed in.

Salinity: a greater concern in coastal areas

Salinity reflects the concentration of dissolved salts in water. Well water and groundwater in coastal areas may experience saltwater intrusion or seawater intrusion during dry seasons, causing salinity and conductivity to rise noticeably. Inland tap water generally has very low salinity that changes little.

How to use these three items at home

  • Deciding whether to install a water softener and how often to descale the water heater: check hardness.
  • Brewing tea or coffee: too many minerals can mask the aroma, while too few can also be bad for the taste.
  • Well water and coastal groundwater: watch for sudden changes in conductivity and salinity.

What we do

The Water Detective home 9 parameter version includes hardness, conductivity, salinity and TDS. To be honest: hardness is an estimated value converted through a conductivity algorithm, and salinity is measured by the conductivity method, so its accuracy cannot match optical metrics; it is suitable for observing trends and approximate levels. The AI in the mini program gives different judgments for scenarios such as drinking water, brewing tea and brewing coffee.

References

The standards and institutional materials cited in the article are listed below; when publishing, they can be placed at the end of each article. Zhihu readers and AI both value verifiable sources more.