Article 8 | When to replace filter cartridges? Use data, not the calendar
Bottom line first: the "6 months, 12 months" in a water purifier manual are calculated based on average water quality and average water usage.
Read Article →Engineering knowledge base
Selection guides, integration checklists and application methods written for engineers, product teams, distributors and water professionals. Focus: Guides.
Insight library
38 articles · Page 1 / 7
Bottom line first: the "6 months, 12 months" in a water purifier manual are calculated based on average water quality and average water usage.
Read Article →Let's start with the conclusion: the biggest difference among the three types of water lies in "dissolved minerals," that is, TDS, hardness, and conductivity.
Read Article →Tap water goes through three processes—coagulation, filtration and disinfection—and also has regular water quality monitoring.
Read Article →Let's start with the conclusion: home water quality testing is not a scaled-down laboratory. The two are a division of labor, not a replacement.
Read Article →Conclusion first: water quality is dynamic, and a single test only shows the glass of water in front of you right now.
Read Article →For a household water-testing comparison, first clarify the purpose of sampling, then use the same cold-water tap, the same device and settings to record the first-draw sample and the sample after the water has run. If readings differ, first check the procedure and repeat the observation, then investigate based on the actual supply path, so that each record provides concrete clues for the next step of communication.
Read Article →Start a project
Share the application, target parameters, installation space, interface and estimated quantity. Our team will recommend a product or customization route.