Engineering knowledge base
Practical knowledge for better water-sensing decisions
Selection guides, integration checklists and application methods written for engineers, product teams, distributors and water professionals.
Insight library
All insights
128 articles · Page 1 / 22
How to test tap water? A comparison method for the first draw vs. after running the water
For a household water-testing comparison, first clarify the purpose of sampling, then use the same cold-water tap, the same device and settings to record the first-draw sample and the sample after the water has run. If readings differ, first check the procedure and repeat the observation, then investigate based on the actual supply path, so that each record provides concrete clues for the next step of communication.
Read Article →Boundaries of the relationship between cats' water taste preferences and water quality data: a step-by-step guide
This article is intended for pet water fountain brands, product managers and hardware R&D teams. Centered on the nine screening indicators of the AtomBit Water Detective 4, it explains how to carry out R&D testing and product definition related to cats' drinking water preferences within the device's capability boundaries, and clarifies which conclusions must be confirmed by a laboratory.
Read Article →Article 13 | How to Read the Parameter Table of a Water Quality Test Pen
Read Article →Hygiene management for fresh water tanks, hoses and connectors: correcting common misconceptions
For RV road-trip users, use Water Detective 4 to screen water quality in fresh water tanks, hoses and connectors, clarify common hygiene misconceptions, and explain sampling, result interpretation and the boundaries of action.
Read Article →Rapid prototyping methods for small-appliance water-quality sensor modules
Conductivity/TDS functions in small appliances often hold up prototype progress. This article covers probes, interface ASICs, temporary wiring harnesses, main control boards, sample logs and preliminary calibration to present rapid prototyping methods suitable for water purifiers, water dispensers, coffee machines, smart cups and pet water fountains, emphasizing the boundary between consumer-grade screening and device feedback, and avoiding mixing laboratory analysis requirements into prototype validation.
Read Article →